Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Yeti
    4. : -board computer

Skoda Yeti - -board computer

Skoda Yeti (2009-2017 / MK 1)
Instructions for resetting the service light
If the SERVICE warning light appears on the instrument panel display when the ignition is switched on; it means that the time has come to carry out …read all…
Posted on 13 September 2023 by ScegliAuto
Antenna (1) -board computer (1) Checks and maintenance (15) Dashboard (1) Cabin air filter (2) Headlight bulb (1) License plate light (1) Door panel (3) Tires (1) Instrument cluster (6) Fuse box (10)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos