Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Yeti
    4. : Door panel

Skoda Yeti - Door panel

Skoda Yeti (2009-2017 / MK 1)
How do I replace the door panel on the Å koda Yeti?
In order to replace the door panel of the Å koda Yeti you have to loosen the screws located under the interior handle, next to the door actuator and in the …read all…
Posted on 21 March 2024 by ScegliAuto
Skoda Yeti (2009-2017 / MK 1)
Removing the front door panel on the Skoda Yeti
We see in this video the main steps to remove the front door panel on the first series Skoda yeti. First we open the front door and immediately go to remove …read all…
Posted on 23 February 2024 by ScegliAuto
Skoda Yeti (2009-2017 / MK 1)
Skoda yeti removing the door panel
Let's see the disassembly of the door panel of a Skoda Yeti with relative cover pieces. We disassemble the plastics to access the tightening screws. We remove …read all…
Posted on 27 December 2023 by ScegliAuto
Antenna (1) -board computer (1) Checks and maintenance (15) Dashboard (1) Cabin air filter (2) Headlight bulb (1) License plate light (1) Door panel (3) Tires (1) Instrument cluster (6) Fuse box (10)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos