Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diagram and positioning of the internal fuses of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Fuse box

Today we will see the instructions that will allow us to locate the internal fuse box of the Smart Fortwo, by obtaining the schematic and diagram. First, we get into the vehicle on the passenger side and start removing the carpet covering to access the fuse box, which is located at the bottom; in the vehicle's user and maintenance manual, we find various tables indicating all the codes and amperages for each individual fuse, as shown in the video. In case of fuse replacement, it is necessary to adhere to the amperages indicated on the fuse head.

Posted on 11 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Layout and positioning of the fuses in the Smart Fortwo.
Layout and positioning of the fuses in the Smart Fortwo.
Smart (1998-2007 / 450) The following steps will show us the layout and positioning of the fuses in the Smart Fortwo. First, we get on board the car, on the driver's side, a…
Diagram and positioning of the fuses of the Smart Fortwo.
Diagram and positioning of the fuses of the Smart Fortwo.
Smart (2007-2015 / 451) In this guide we will see the information related to the positioning and the fuse diagram of the Smart Fortwo. The fuse box is located on board the v…
Layout and positioning of the internal fuses of the Smart Fortwo.
Layout and positioning of the internal fuses of the Smart Fortwo.
Smart (1998-2007 / 450) Today's main instructions will show us how to locate the fuse box and how to find the diagram and chart of the Smart Fortwo. First, we open the front…

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Replace a Headlight Bulb on a Ford Focus

How do you replace a rear headlight bulb on a Ford Focus? Let's see how to do it in this video. This operation is very simple to carry out. Open the boot and remove the plastic cover from the side trim. Unscrew the retaining screws of the lamp unit, then pull it out by hand from the car's bodywork. Disconnect the power connectors, taking care not to damage them. Once the rear light is removed, replace the damaged bulbs. After completing this operation, reassemble everything in reverse order. Finally, check that the lights are functioning correctly.

Watch the video!


by ScegliAuto

More videos