Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I set the clock of the Smart 453?

Model: Smart Smart 453 - Years 2014-2022
Part: Clock

To be able to adjust the clock of the Smart 453, you need to turn on the instrument panel and then the SETUP button which is immediately below the radio display. A menu will appear where it will be necessary to select the "Clock" item by pressing the OK button on the right. At this point it will be possible to set the time by turning the knob located around the OK button. After selecting the hour, you can also select the minutes by carrying out the same operation. After selecting the hours and minutes, you will need to confirm the entry with the OK button and check the new time by returning to the main screen.

Posted on 28 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Smart?
How do you set the clock on the Smart?
Smart (2014-2022 / 453) The adjustment of the clock shown on the Smart's instrument panel can be done by turning on the instrument panel, so that it is possible to navigate …
How do you set the Smart clock?
How do you set the Smart clock?
Smart (2014-2022 / 453) It will be possible to adjust the clock of the Smart by turning on the instrument panel and then pressing the SETUP button located just below the rad…
Where is the OBD port located on the Smart 453?
Smart (2014-2022 / 453) To be able to find the OBD port located in the interior of your Smart 453, you must follow the few simple steps described in this new guide addressed…

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos