Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Smart Fortwo external rear-view mirror

Model: Smart Smart 450 - Years 1998-2007
Part: Side mirror

In today's video tutorial we will see the instructions on how to disassemble the exterior rearview mirror of a Smart Fortwo first series, in simple steps. First we open the front door and we go to remove the triangular plastic cap located on the back of the mirror, unscrewing the nut; then let's unscrew the three screws of the mirror, using a socket wrench, and let's remove it from the outside. At this point we are going to remove the glass of the mirror, by levering it, and we disassemble our rearview mirror piece by piece, following the video to the end!

Posted on 6 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Smart Fortwo
How to replace the external rearview mirror of the Smart Fortwo
Smart (2007-2015 / 451) .. how to disassemble and replace the external rearview mirror of the Smart Fortwo. First, we open the front door and start removing the plastic cover located.. …
Removing the Smart Fortwo 450 interior rear-view mirror
Removing the Smart Fortwo 450 interior rear-view mirror
Smart (1998-2007 / 450) .. how to disassemble and replace the interior rear view mirror of a Smart Fortwo 450, in the simple steps illustrated below. First we get inside the car;.. …
How to replace the external panel of the Smart Fortwo door
How to replace the external panel of the Smart Fortwo door
Smart (1998-2007 / 450) .. and reassembling the adjustment of the rearview mirror, following the video tutorial until the end!.. …

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos