Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How is the service reset done on the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Warning light – error code

This video shows the very simple procedure to carry out to reset the service of the Smart 451. First of all, the key must be inserted in the ignition switch, in the central tunnel of the vehicle and turned on the ignition. Subsequently, we will actually go to visually check the presence of the aforementioned warning light and if it is on, at the bottom of the instrument panel, we will click the button on the left of the same panel for the first time, we will always turn off the same panel, turn it on again after a few seconds and keep it clicked the above button for a few more seconds, until the light goes out.

Posted on 21 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) The operation of resetting the Service light on the Smart 451 is done by holding down the button located on the left side of the instrument panel. Wh…
How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) The operation of resetting the Service light of the Smart 451 is done by turning on the instrument panel by turning the key and then quickly pressing…
How to do a service reset on a Smart 451
How to do a service reset on a Smart 451
Smart (2007-2015 / 451) Let's see thanks to this short video guide how to perform the service reset on a Smart 451, a model in production from 2007 to 2015. After performing…

    Frequently Asked Questions

    • Smart 2007-2015 - What does error code P1700 indicate on a Smart Fortwo? Read answer
    • Smart 1998-2007 - Why does the ESP light turn on in the Smart 450? Read answer
    • Smart 2007-2015 - What does the yellow triangle light with exclamation mark on a Smart ForTwo mean? Read answer

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos