Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gearbox oil in the Smart Roadster?

Model: Smart Smart Roadster, 452 - Years 2003-2005
Part: Transmission fluid

In this tutorial we can see how to change the gearbox oil in the Smart Roadster, a very simple and fast operation, to be done every 100,000 km or so. First of all, let's wait for the engine to cool down, then lift the left rear side, locate the two bolts indicated and, using a T50 Torx key, unscrew them both. Once all the oil contained inside the gearbox has drained out, tighten the lower bolt and introduce the required amount of oil from the upper hole. For this last phase we can help ourselves with a pump or a hose.

Posted on 7 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the clutch of the Smart Roadster?
How do you adjust the clutch of the Smart Roadster?
Smart (2003-2005 / Roadster, 452) To adjust the clutch of the Smart Roadster, you need to modify the settings of the control unit by connecting a diagnostic tool to the vehicle's OBD …
Where are the fuses located in the Smart Roadster?
Where are the fuses located in the Smart Roadster?
Smart (2003-2005 / Roadster, 452) The fuses of the Smart Roadster are contained within the appropriate fuse box installed inside the vehicle. The fuse box is located in the lower left…
How do you replace the roof of the Smart Roadster?
How do you replace the roof of the Smart Roadster?
Smart (2003-2005 / Roadster, 452) In order to replace the roof of the Smart Roadster, you need to open the sliding mechanism by pressing the designated button located inside the car: …

Other guides you may be interested in

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos