Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Roof of the Smart Roadster?

Model: Smart Smart Roadster, 452 - Years: 2003, 2004, 2005
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the roof of the Smart Roadster, open the sliding mechanism by pressing the appropriate button located inside the cabin: this will allow you to remove the two side parts of the roof on which the mechanism slides. Once these two parts have been completely removed, position the new roof on top of the car: it must be secured with the appropriate clips inside.

After installation, ensure that the new roof does not cause any issues.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Smart (2003-2005 / Roadster, 452) To repair the roof on the Smart Roadster, press the appropriate button located inside the cabin to fully open the roof. Once it is completely lowered…
Smart (2003-2005 / Roadster, 452) To replace the roof of the Smart Roadster, open the bonnet and unscrew the fixing screws of the internal compartment to access the battery underneath…
Smart (2007-2015 / 451) How to remove the roof of a Smart Fortwo? Follow these steps: use a screwdriver to remove the side plastic covers located at the edges of the roof, t…

    Frequently Asked Questions

    • Smart 1998-2007 - How do you unlock the Smart Fortwo immobilizer? Read answer
    • Smart 1998-2007 - Where is the horn of the Smart 450 located? Read answer
    • Smart 1998-2007 - Where is the jack on a Smart ForTwo? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos