Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Subaru BRZ

Model: Subaru Brz MK 1, ZN6.ZC6 - Years 2012-2023
Part: Service warning light

To reset the service light on a Subaru BRZ, turn on the instrument cluster by turning the ignition key in the ignition switch: once it is on, you can repeatedly press the ODO button located to the left of the instrument cluster. This way, you can stop when "Trip A" appears on the instrument cluster; at this point, turn off the cluster by turning the key. Now, while the cluster is off, hold down the ODO button and then turn the key to turn the cluster back on: this way, you will see that the light will turn off after a few seconds.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Subaru BRZ
How to disassemble the front door panel of the Subaru BRZ
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) The following steps will show us how to disassemble and remove the front door panel of the Subaru BRZ. First, we open the front door of the car and s…
How to Replace the Key Battery in a Subaru BRZ
How to Replace the Key Battery in a Subaru BRZ
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) If you don't know how to replace the button battery in your Subaru BRZ key, don't worry. In this new guide dedicated to you, you will find all the ne…
How to replace the battery in the Subaru BRZ key.
How to replace the battery in the Subaru BRZ key.
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) If you want to replace the battery inside the key of your Subaru BRZ by yourself but do not know the steps to follow, then all you have to do is read…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos