Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Suzuki GSX-R 750?

Model: Suzuki Gsx R 750
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Suzuki GSX-R 750, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then remove the left side fairing and place a container underneath the bike.

Next, locate the drain plug, unscrew it using a 17mm socket wrench and let all the oil in the system drain out. At this point, all that's left to do is to unscrew the old filter, tighten both the replacement and the plug, and pour in the new oil through the appropriate hole.


Posted on 28 December 2024 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Suzuki GSX R 750?
How to Change the Engine Oil of the Suzuki GSX R 750?
Gsx R 750 .. To change the engine oil of the Suzuki GSX R 750, loosen the drain plug located at the lower central area of the bike: this will allow you to collect.. …
How to replace the engine oil and oil filter of the Suzuki GSX-R 750.
How to replace the engine oil and oil filter of the Suzuki GSX-R 750.
Gsx R 750 .. engine oil and the oil filter on the Suzuki GSX-R 750 motorcycle. First, let's put the motorcycle on the stand and start unscrewing the oil drain bolt.. …
How to Change the Engine Oil in a Suzuki GSX-R 750?
How to Change the Engine Oil in a Suzuki GSX-R 750?
Gsx R 750 .. how to change the engine oil in a Suzuki GSX-R 750, a simple and quick operation to perform every 12 months. First, ensure the engine is sufficiently.. …

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos