Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's steps will allow us to perform the routine maintenance service by replacing the engine oil and the oil filter on the Suzuki GSX-R 750 motorcycle. First, let's put the motorcycle on the stand and start unscrewing the oil drain bolt located under the engine, letting it drain into a container for about ten minutes. Then, we'll use the appropriate tool to unscrew the oil filter cartridge, replacing it with a new one (screwing it in by hand and tightening gently). At this point, we will unscrew the fill cap and top off with the new engine oil!

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Suzuki GSX R 750?
How to Change the Engine Oil of the Suzuki GSX R 750?
Gsx R 750 To change the engine oil of the Suzuki GSX R 750, loosen the drain plug located at the lower central area of the bike: this will allow you to collect…
How to change the motor oil in the Suzuki GSX-R 750?
How to change the motor oil in the Suzuki GSX-R 750?
Gsx R 750 In this tutorial we can see how to replace the engine oil in the Suzuki GSX-R 750, an extremely simple and quick operation, to be carried out every 1…
How to change the engine oil of the Suzuki GSX R 750?
How to change the engine oil of the Suzuki GSX R 750?
Gsx R 750 To change the engine oil of the Suzuki GSX R 750, unscrew the oil drain plug located on the left side of the bike, at the bottom just below the panel…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos