Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Suzuki GSX R 1000, start by making sure the engine is warm or slightly hot. Lift the motorcycle safely with a center or side stand. Place a container under the oil drain plug. Remove the oil filler cap on the alternator cover or engine crankcase, then unscrew the oil drain plug located on the engine crankcase. Allow the used oil to completely drain into the container. Remove and replace the oil filter. Apply a light amount of new oil on the gasket of the new filter before installing it. Replace the oil drain plug and tighten it to the correct torque. Add the new oil through the oil filler hole, using the oil recommended in the owner's manual and checking the recommended quantity. Make sure to check the oil level using the dipstick and adjust if necessary. Start the engine and check for any oil leaks. Remember to properly dispose of the used oil at an authorized collection center.

Posted on 31 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Suzuki GSX-R 1000?
How to replace the engine oil in the Suzuki GSX-R 1000?
Gsx R 1000 In this tutorial we can see how to replace the engine oil in the Suzuki GSX-R 1000, an extremely simple and quick operation. First of all, make sure …
How to change the engine oil in the Suzuki GSX-R 1000?
How to change the engine oil in the Suzuki GSX-R 1000?
Gsx R 1000 In this tutorial, we will see how to replace the engine oil in the Suzuki GSX-R 1000, an extremely simple and quick operation. First of all, let's ma…
How to change the battery of the Suzuki GSX-R 1000
How to change the battery of the Suzuki GSX-R 1000
Gsx R 1000 These short and simple steps will show us how to disassemble and replace the battery of the Suzuki GSX-R 1000 motorcycle. First of all, we put the mo…

How to Change the Engine Oil on a Beta RR 125?

To change the engine oil on a Beta RR 125, loosen the drain plug located at the bottom centre of the bike. Once removed, collect all the used oil in a suitably positioned container. After the oil has completely drained, remove the oil filter next to the drain plug to replace it with a new part. Now, refill by adding the necessary amount of oil through the hole on the right side of the engine casing.

Watch the video!


by ScegliAuto

More videos