Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Suzuki Burgman 200 scooter?

Model: Suzuki Burgman 200
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Suzuki Burgman 200 scooter, a very simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath the scooter, locate the drain plug and unscrew it using a 17mm wrench.

Let all the oil in the system drain out, open the filter cap by unscrewing the bolts with an 8mm wrench, insert the replacement and reassemble everything. At this point, all that's left is to pour the necessary amount of oil through the appropriate hole.


Posted on 15 October 2025 by ScegliAuto


Related tutorials

Reset the Engine Oil Warning Light on the Suzuki Burgman 200
Reset the Engine Oil Warning Light on the Suzuki Burgman 200
Burgman 200 Briefly follow the steps to reset the service warning light for the engine oil change on the Suzuki Burgman 200 scooter. First, place the scooter on …
How to Replace the Battery in the Suzuki Burgman 200 Scooter?
How to Replace the Battery in the Suzuki Burgman 200 Scooter?
Burgman 200 Replacing the battery in the Suzuki Burgman 200 scooter, as shown in this tutorial, is an extremely simple and quick operation. First, ensure the key…
Resetting the engine oil change indicator light (service) on the Suzuki Burgman 200.
Resetting the engine oil change indicator light (service) on the Suzuki Burgman 200.
Burgman 200 Today we will discover the instructions that allow us to reset the maintenance light for the oil change on the Suzuki Burgman 200. We perform the res…

How to Replace the Headlight Bulb on the MV Agusta Brutale 800RR?

To replace the headlight on the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical unit: these screws will be located on the sides and underneath the headlight. Once the screws are removed, you can extract the optical unit from its housing and disconnect the connector located inside; at this point, you can remove the bulb inside so that you can insert the new one. The headlight can now be secured with the appropriate screws to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos