Do it yourself
Frequently asked questions about cars and motorcycles
How to replace the engine oil and filter on a Suzuki Burgman 400. Position the scooter on its original stand. Using a socket spanner, unscrew the bolt from the oil sump and drain the fluid into a container. Unscrew the securing screws of the cap where the oil filter is located and remove it. Take out the used oil filter kit and place a new one after cleaning the area (replace the filter if damaged). Finally, top up the new oil in the engine and close the plastic cap. You can then start the scooter.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
Burgman 400 Replacing the motor oil in the Suzuki Burgman 400 scooter, as we can see in this tutorial, is an extremely simple and fast operation. First of all, m…
Burgman 400 Perform the engine oil replacement along with the filter on a Suzuki Burgman 400. Follow these steps for scooter maintenance. Position the scooter on…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos