Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Intruder
Part: Battery

In this tutorial, you will see how to replace the battery in a Suzuki Intruder, a very simple and quick operation. First, ensure that the key is not inserted, then go to the lower area of the motorcycle and remove the plastic cover protecting the battery. Next, unscrew the fastening screws of both terminals, disconnect them starting from the negative, and proceed by unscrewing the lower bolt with a 10 mm spanner. At this point, you can pull the battery out from the slot at the bottom, position the replacement, and follow the reverse procedure.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Suzuki Intruder?
How to Change the Engine Oil in a Suzuki Intruder?
Intruder As shown in this tutorial, changing the engine oil in a Suzuki Intruder is an extremely simple and quick operation. First, ensure that the engine is …
How to Replace the Battery in a Suzuki Intruder 800?
How to Replace the Battery in a Suzuki Intruder 800?
Intruder You can replace the battery in the Suzuki Intruder 800 by loosening the screws that secure the supports holding it in place: these will be located at…
How to Replace the Front Headlight Bulb on the Suzuki Intruder?
How to Replace the Front Headlight Bulb on the Suzuki Intruder?
Intruder In this tutorial, you will see how to replace the front headlight bulb on the Suzuki Intruder, a very simple and quick operation. First, ensure that …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos