Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Address 125

How to Reset the Service on the Suzuki Address 125 Scooter

Model: Suzuki Address 125
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the service on the Suzuki Address 125 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the button located on the right side of the dashboard while simultaneously turning on the instrument panel.

Keep the button pressed for as long as necessary until the service light disappears from the display, restart the panel, and check that the procedure has been successful.


Posted on 3 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on Suzuki Address 125?
How to Reset the Service Light on Suzuki Address 125?
Address 110 You can reset the Service light on the Suzuki Address 125 by holding down the button located at the bottom centre of the instrument panel while it is…
How do you replace the starter motor of the Suzuki Address 125?
How do you replace the starter motor of the Suzuki Address 125?
Address 110 It will be possible to replace the starter motor of the Suzuki Address 125 by opening the underseat compartment and loosening the screws that secure …
How do you replace the battery of the Suzuki Address 125?
How do you replace the battery of the Suzuki Address 125?
Address 110 To replace the battery of the Suzuki Address 125, you need to loosen the screws that secure the front panel of the motorcycle, located immediately be…

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos