Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the battery of the Suzuki Address 125, you need to loosen the screws that secure the front panel of the motorcycle, located immediately below the windshield and between the two front headlights. Once this panel has been completely removed from its seat, you will be able to locate the battery underneath. This can be removed from its housing by unscrewing the screws that secure it and disconnecting the power cables; in this way, you can insert the new one, ensuring that everything works correctly.

Posted on 6 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the starter motor of the Suzuki Address 125?
How do you replace the starter motor of the Suzuki Address 125?
Address 110 It will be possible to replace the starter motor of the Suzuki Address 125 by opening the underseat compartment and loosening the screws that secure …
How to Reset the Service Light on Suzuki Address 125?
How to Reset the Service Light on Suzuki Address 125?
Address 110 You can reset the Service light on the Suzuki Address 125 by holding down the button located at the bottom centre of the instrument panel while it is…
How do you replace the battery of the Suzuki Address 110?
How do you replace the battery of the Suzuki Address 110?
Address 110 In order to replace the battery of the Suzuki Address 110, you need to completely remove the front panel of the motorcycle, which is located just bel…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos