Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can reset the Service light on the Suzuki Address 125 by holding down the button located at the bottom centre of the instrument panel while it is off: continue holding it down while inserting the ignition key into the ignition switch and turning it to switch on the panel. Once the panel is on, continue holding the button until the Service light disappears completely. At the end of the procedure, you can release the button and turn off the instrument panel.

Posted on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Suzuki Address 125?
How do you replace the battery of the Suzuki Address 125?
Address 110 To replace the battery of the Suzuki Address 125, you need to loosen the screws that secure the front panel of the motorcycle, located immediately be…
How do you replace the starter motor of the Suzuki Address 125?
How do you replace the starter motor of the Suzuki Address 125?
Address 110 It will be possible to replace the starter motor of the Suzuki Address 125 by opening the underseat compartment and loosening the screws that secure …
How to Replace the Stop Light Bulb on a Suzuki Address 110 Scooter?
How to Replace the Stop Light Bulb on a Suzuki Address 110 Scooter?
Address 110 As shown in this tutorial, replacing the stop light bulb on a Suzuki Address 110 scooter is an extremely simple and quick task. Before proceeding, en…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos