Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Sv 650
Part:

In today’s guide video, we will see how to remove, in simple steps, the rider's seat and the passenger seat of a Suzuki SV 650 and SV 1000. First, remove the passenger seat by inserting the ignition key into the lock found below, and then remove the seat. For the rider's seat, it will be necessary to undo the screws of the side plastics located under the seat to access the rear securing screws; undo these with an Allen key and extract the seat. Then reassemble them by applying the reverse procedure!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the seat of the Suzuki SV 650
How to remove the seat of the Suzuki SV 650
Sv 650 Today we will discover the instructions that allow us to disassemble and replace the driver and passenger seats of the Suzuki SV 650 motorcycle. Firs…
How to Remove the Main Seat on a Suzuki SV 650?
How to Remove the Main Seat on a Suzuki SV 650?
Sv 650 In this tutorial, you will see how to remove the main seat on a Suzuki SV 650, an extremely simple and quick operation, for example, if you need to a…
Removing and Replacing the Battery on a Suzuki SV 650
Removing and Replacing the Battery on a Suzuki SV 650
Sv 650 This guide provides instructions for removing and replacing the battery on a Suzuki SV 650 motorcycle. First, place the motorcycle on a stand and rem…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos