Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove and replace the front brake pads on a Suzuki GSX-R 1000. First, undo the bolts securing the brake caliper using a socket spanner; then remove the caliper itself and push the piston back as far as possible. At this point, remove the old pads and replace them with new ones of the correct type; before fitting them, clean the caliper area of any carbon residue. Finally, apply the reverse procedure for reassembly!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear brake pads on the Suzuki GSX-R 1000
How to replace the rear brake pads on the Suzuki GSX-R 1000
Gsxr 1000 .. replacing the rear brake pads on the Suzuki GSX-R 1000 motorcycle. First, place your bike on a stand and start by removing the locking pin of the rear.. …
How to Replace the Rear Brake Pads on the Suzuki GSX-R 1000
How to Replace the Rear Brake Pads on the Suzuki GSX-R 1000
Gsxr 1000 .. as well as the front ones, on the Suzuki GSX-R 1000 motorcycle. First, place your motorcycle on a stand and start unscrewing the bolts securing the.. …
Replacing the Air Filter on the Suzuki Gsx-r 1000
Replacing the Air Filter on the Suzuki Gsx-r 1000
Gsxr 1000 ..eplace the engine air filter on the Suzuki Gsx-r 1000 in simple, quick steps. First, remove the rider's seat to access the fuel tank's securing screws; t.. …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos