Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Sv 650
Part: Oil filter

Remember to start the engine for a few minutes before changing the oil to warm up the circulating lubricant and make it less viscous. Unscrew the bolt that acts as the rear cap for the drain hole, as shown in the video, and collect the used oil in a container. While the oil drains, unscrew the oil filter located just behind the sump, using a suitable filter key (some oil will obviously come out from here as well). Before fitting the new filter, remember to lubricate its O-ring. Screw in the filter, close the drain hole, and refill the same quantity of lubricant through the upper hole.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Suzuki SV 650?
How to Change the Engine Oil in a Suzuki SV 650?
Sv 650 In this tutorial, we will see how to change the engine oil in a Suzuki SV 650, a very simple and quick operation. First, ensure that the engine is co…
How to Change the Engine Oil in a Suzuki SV 650?
How to Change the Engine Oil in a Suzuki SV 650?
Sv 650 In this tutorial, we can see how to change the engine oil in the Suzuki SV 650, a very simple and quick operation. First, ensure that the engine is s…
How to Change the Engine Oil in a Suzuki SV 650?
How to Change the Engine Oil in a Suzuki SV 650?
Sv 650 In this tutorial, you will see how to change the engine oil in a Suzuki SV 650, a very simple and quick operation. First, ensure the engine is suffic…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos