Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil Change on the Suzuki GSX-R 600 K8

Model: Suzuki Gsxr 600
Part: Engine oil

Video tutorial

In this video, we will go through the main steps to perform the routine maintenance oil change on the Suzuki GSX-R 600 K8. First, remove the lower engine fairing by unscrewing the screws, then remove the oil drain bolt using a 17 mm socket or spanner.

Allow the oil to drain into a container for about ten minutes, as shown in the video.

Next, unscrew the oil filter using the appropriate tool and replace it with a new one; open the filler hole to pour in the new oil!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Gsxr 600 This tutorial shows how to change the engine oil in the Suzuki GSX-R 600, a very simple and quick operation. First, ensure the engine is cool enough,…
Gsxr 600 Replacing the battery of the Suzuki GSX-R 600, as well as the GSX-R 750, is a task that takes just a few minutes and a simple socket spanner. First, …
Gsxr 600 In this tutorial, see how to set the time on the Suzuki GSX-R 600, a very simple and quick operation, for example, after disconnecting the battery or…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos