Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Gs 500
Part: Brake pads

In this brief and simple guide, find instructions on how to remove and replace the rear brake pads on the Suzuki GS 500 motorcycle. First, place your motorcycle on the centre stand and begin to unscrew the fastening bolts of the rear brake caliper, removing it from the disc; then apply pressure on the caliper piston to retract it, removing the old pads as shown in the video. At this point, clean the caliper of any residual dirt, then install the new high-quality brake pads; finally, refit the brake caliper!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads on Suzuki GS 500
Replacing Brake Pads on Suzuki GS 500
Gs 500 Today, you will learn how to remove and replace the brake pads on a Suzuki GS 500, specifically the rear ones. First, remove the protective cover of …
How to Replace the Front Brake Pads on the Suzuki GS 500
How to Replace the Front Brake Pads on the Suzuki GS 500
Gs 500 Discover the steps to remove and replace the front brake pads, which also applies to the rear pads, on the Suzuki GS 500. First, loosen the bolts of …
How to replace the front brake pads on a Suzuki GS 500
How to replace the front brake pads on a Suzuki GS 500
Gs 500 Today, we will go through the necessary instructions to remove and replace the front brake pads (this also applies to the rear ones) on a Suzuki GS 5…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos