Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This brief guide provides instructions to remove and replace the clutch discs on the Suzuki GSF Bandit 650 motorcycle. First, place your bike on a stand and drain the engine oil by unscrewing the bolt located on the oil sump; then unscrew all the screws on the sides of the clutch cover on the left, as shown in the video. Next, unscrew the five screws of the clutch pack, removing the metal disc followed by the clutch discs; then install the new clutch, alternating the cork discs with the metal ones!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the clutch discs of the Suzuki GSF 650 Bandit
Replacement of the clutch discs of the Suzuki GSF 650 Bandit
Gsf Bandit 650 Let's see the information that will allow us to disassemble and replace the clutch discs of the Suzuki GSF 650 Bandit. First, we put the motorcycle o…
Guide to disassembling the clutch of the Suzuki GSF Bandit 650
Guide to disassembling the clutch of the Suzuki GSF Bandit 650
Gsf Bandit 650 In a few simple steps, we will see the instructions that will allow us to disassemble and replace the clutch discs of the Suzuki GSF Bandit 600 motor…
How to replace the rear wheel bearing on the Suzuki GSF Bandit 650
How to replace the rear wheel bearing on the Suzuki GSF Bandit 650
Gsf Bandit 650 Below is the procedure to remove and replace the rear wheel bearing on the Suzuki GSF Bandit 650 motorcycle. First, place the bike on the centre stan…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos