Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
On the MV Agusta F3 800 it will be possible to replace the exhaust after removing the plastic cover located on the right side of the bike, in the area immediately before the terminal. Under this panel, you will find the bolts that secure the exhaust: by loosening them and disconnecting the connecting clamp that connects the exhaust to the exhaust pipe, it will be possible to detach it and replace it with a new spare part. The new exhaust must then be connected to the exhaust pipe and secured to its housing using the appropriate bolts that have just been removed.

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the MV Agusta F3 800?
How do you replace the exhaust pipe of the MV Agusta F3 800?
F3 800 The exhaust installed on the MV Agusta F3 800 can be replaced by removing the plastic cover located on the right side of the vehicle, in the area imm…
How to Replace the Exhaust on the MV Agusta F3 800?
F3 800 To replace the exhaust on the MV Agusta F3 800, remove the plastic cover located on the right side of the bike, just before the exhaust. Under this c…
How do you replace the muffler of the MV Agusta F3 800?
How do you replace the muffler of the MV Agusta F3 800?
F3 800 On the MV Agusta Brutale 800, the replacement of the exhaust is done by removing the fairing located on the right side of the motorcycle, in the area…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos