Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In a few simple steps, we will see the instructions that will allow us to disassemble and replace the clutch discs of the Suzuki GSF Bandit 600 motorcycle. First of all, we put the motorcycle on the center stand and begin to drain the engine oil by loosening the drain bolt located under the engine; then we unscrew the clutch cover screws, located on the right, in order to access the clutch kit, as shown in the video. At this point, we unscrew the clutch pack screws, removing the discs one by one; we replace them with the new ones, alternating the two types of discs.

Posted on 14 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on the Suzuki GSF Bandit 650
How to Replace the Clutch on the Suzuki GSF Bandit 650
Gsf Bandit 650 This brief guide provides instructions to remove and replace the clutch discs on the Suzuki GSF Bandit 650 motorcycle. First, place your bike on a st…
Replacement of the clutch discs of the Suzuki GSF 650 Bandit
Replacement of the clutch discs of the Suzuki GSF 650 Bandit
Gsf Bandit 650 Let's see the information that will allow us to disassemble and replace the clutch discs of the Suzuki GSF 650 Bandit. First, we put the motorcycle o…
How to Replace the Exhaust on a Suzuki GSF Bandit 650?
How to Replace the Exhaust on a Suzuki GSF Bandit 650?
Gsf Bandit 650 To replace the exhaust on a Suzuki GSF Bandit 650, loosen the screws that secure it to its mounting on the right side of the bike, near the rear whee…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos