Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on a Suzuki GSF Bandit 650, loosen the screws that secure it to its mounting on the right side of the bike, near the rear wheel. Once the mounting screws are loosened, you can proceed to widen the ring that connects the exhaust manifold to the exhaust. This will allow you to remove it from its position and insert the new one. The new exhaust must be properly secured in place and connected to the manifold with the corresponding ring, ensuring it functions correctly.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Suzuki GSF Bandit 650?
How do you replace the battery of the Suzuki GSF Bandit 650?
Gsf Bandit 650 In order to replace the battery of the Suzuki GSF Bandit 650, you need to loosen the screws that hold the motorcycle seat in place: these screws will…
How to Replace the Front Headlamp Bulb in a Suzuki GSF 650 Bandit?
How to Replace the Front Headlamp Bulb in a Suzuki GSF 650 Bandit?
Gsf Bandit 650 In this tutorial, you will see how to replace the front headlamp bulb in a Suzuki GSF 650 Bandit, an extremely simple and quick operation. First, ens…
How to replace the rear wheel bearing on the Suzuki GSF Bandit 650
How to replace the rear wheel bearing on the Suzuki GSF Bandit 650
Gsf Bandit 650 Below is the procedure to remove and replace the rear wheel bearing on the Suzuki GSF Bandit 650 motorcycle. First, place the bike on the centre stan…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos