Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below is the procedure to remove and replace the rear wheel bearing on the Suzuki GSF Bandit 650 motorcycle. First, place the bike on the centre stand and start by undoing the central axle of the rear wheel; then disconnect the drive chain from the sprocket, also removing the rear brake caliper, as shown in the video. At this point, slide out the wheel and remove the sprocket by undoing the five screws; then replace the bearing with the new original one, ensuring it is fitted correctly, and finally reassemble the rear wheel!

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Suzuki GSF Bandit 650?
How to Replace the Exhaust on a Suzuki GSF Bandit 650?
Gsf Bandit 650 To replace the exhaust on a Suzuki GSF Bandit 650, loosen the screws that secure it to its mounting on the right side of the bike, near the rear whee…
How to Replace the Front Headlamp Bulb in a Suzuki GSF 650 Bandit?
How to Replace the Front Headlamp Bulb in a Suzuki GSF 650 Bandit?
Gsf Bandit 650 In this tutorial, you will see how to replace the front headlamp bulb in a Suzuki GSF 650 Bandit, an extremely simple and quick operation. First, ens…
How do you replace the battery of the Suzuki GSF Bandit 650?
How do you replace the battery of the Suzuki GSF Bandit 650?
Gsf Bandit 650 In order to replace the battery of the Suzuki GSF Bandit 650, you need to loosen the screws that hold the motorcycle seat in place: these screws will…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos