Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Fe 350
Part: Engine

To disassemble the engine of the Husaberg FE 350, you will need to loosen the screws that secure the piece to its housing: this will be located in the central part of the frame and will also need to be freed from the intake and exhaust manifolds. Once the engine block has been freed, it will be possible to open it by loosening the screws that secure the cylinder to the top: the latter can now be removed, then also freeing the piston from the corresponding connecting rod. At this point, it will be possible to access the crankshaft and replace any other necessary components.

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Husqvarna FE 350?
How do you disassemble the engine of the Husqvarna FE 350?
Fe 350 In order to disassemble the Husqvarna FE 350 engine, you need to extract it from its housing located in the center of the frame, so that it is possib…
How do you replace the crankshaft seal on the Husaberg FE 350?
How do you replace the crankshaft seal on the Husaberg FE 350?
Fe 350 In order to replace the crankshaft seal of the Husaberg FE 350, you need to loosen the central nut that secures the sprocket, located on the left sid…
Removing Chain and Sprocket on Husaberg FE 350
Removing Chain and Sprocket on Husaberg FE 350
Fe 350 In this video tutorial, we will see the instructions for removing the chain and sprocket from a Husaberg FE 350, following these steps. First, remove…

Replacing the Rear Brake Pads on Piaggio Beverly

Obtain a 17 mm spanner to unscrew the two bolts located under the exhaust that secure the caliper to the brake disc. This will allow you to remove the caliper from the disc. Now use a 6 mm spanner to unscrew the two rear bolts (previously hidden) of the caliper. Once done, remove the worn pads and clean the caliper. Before fitting the new pads, which will obviously be much thicker than the old ones, push back the pistons of the caliper to create space. Insert the pads and proceed in reverse until fully reassembled.

Watch the video!


by ScegliAuto

More videos