Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exhaust on the Husaberg FE 350?

Model: Husaberg Fe 350
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Husaberg FE 350, loosen the screws that secure the side protection panel of the rear mudguard on the right side of the bike: once this panel is removed, you can locate the exhaust underneath, which must be freed from its seat by unscrewing the support screws and widening the ring that connects it to the exhaust manifold.

Once the old exhaust is removed, insert the new one to ensure everything functions correctly.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Replace the Countershaft Seal on the Husaberg FE 350?
How to Replace the Countershaft Seal on the Husaberg FE 350?
Fe 350 To replace the countershaft seal on the Husaberg FE 350, you need to loosen the central nut that secures the sprocket, located on the left side of th…
Replace the Water Pump Seal on the Husqvarna FE 350
Replace the Water Pump Seal on the Husqvarna FE 350
Fe 350 In this video, learn how to disassemble and replace the water pump seal on a Husqvarna FE 350 enduro bike, following the instructions below. First, d…
Replace the Coolant in the Husqvarna FE 350
Replace the Coolant in the Husqvarna FE 350
Fe 350 Today, we will see in this brief and simple guide how to bleed and replace the coolant in the Husqvarna FE 350, following the instructions below. Fir…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos