Do it yourself
| ||||
|
Model: Husaberg Fe 350
In order to replace the crankshaft seal of the Husaberg FE 350, you need to loosen the central nut that secures the sprocket, located on the left side of the motorcycle. Once the nut is loosened, you can remove the sprocket from its housing. Underneath it, you will find the crankshaft seal, which can be taken out of its housing and replaced with a new spare part. After the replacement, you can reposition the sprocket in its place and check that everything is functioning correctly.
Posted on 21 November 2023 by ScegliAuto
|
Replacing the rear tire of the Yamaha Tracer 900We see in this guide the main steps that will allow us to remove and replace the rear wheel and tire of the Yamaha Tracer 900 motorcycle. First we put the central stand on our bike and start by unscrewing the central pin of the rear wheel, using a socket wrench. ; then we remove the brake caliper from the disc and disconnect the drive chain, as shown in the video. At this point we remove the air from the tire and replace it with the new one, having the same measures; we apply the reverse procedure for reassembly! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |