How to Change the Engine Oil in the Husaberg FE 350

Model: Husaberg Fe 350
Part: Engine oil

This video is currently unavailable

This guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Husaberg FE 350 enduro bike. First, unscrew the oil drain bolt located under the engine and let it drain into a container for about ten minutes; then clean the drain plug of any metal debris.

Next, unscrew the screws of the oil filter cover, remove and replace the cartridge with a new one; finally, reassemble everything, pouring in the new engine oil (with the correct specifications).

Updated on 9 June 2026 by ScegliAuto

Related tutorials

How to change the engine oil on a Husaberg FE 350?

Fe 350 To change the engine oil on the Husaberg FE 350, loosen the drain plug located at the bottom of the vehicle. This will allow all the used oil to flow…

Removing Chain and Sprocket on Husaberg FE 350

Fe 350 In this video tutorial, we will see the instructions for removing the chain and sprocket from a Husaberg FE 350, following these steps. First, remove…

How do you disassemble the engine of the Husaberg FE 350?

Fe 350 To disassemble the engine of the Husaberg FE 350, you will need to loosen the screws that secure the piece to its housing: this will be located in th…

How to set the clock on the Piaggio Beverly 125?

To adjust the clock on the Piaggio Beverly 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the SET button located in the centre of the display. At this point, the hours will start to flash and can be changed with another prolonged press of the same button; pressing the SET button twice in quick succession will cause the minutes to start flashing, which can be modified in the same way.

Watch the video!

by ScegliAuto

How to Change the Engine Oil in the Husaberg FE 350

Related tutorials

How to set the clock on the Piaggio Beverly 125?

More videos