|
Do it yourself
| |||
| ||||
How to change the engine oil on a Husaberg FE 350?
Model: Husqvarna Fe 350
Video tutorial
To change the engine oil on the Husaberg FE 350, loosen the drain plug located at the bottom of the vehicle. This will allow all the used oil to flow into a container. You can also remove the oil filter, located on the lower left side of the bike, to replace it with a new one; after replacement, you can top up the oil. To do this, pour the necessary amount of oil through the breather located on the right side of the bike by removing its cap.
Updated on 13 October 2026 by ScegliAuto
Related tutorials
Fe 350
This guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Husaberg FE 350 enduro bike. First, unscrew the …
Fe 350
To replace the exhaust on the Husaberg FE 350, loosen the screws that secure the side protection panel of the rear mudguard on the right side of the …
Fe 350
To replace the air filter on the Husaberg FE 350, you need to remove the left side panel of the bike, which is located just below the seat. Under thi…
|
How to Replace the Front Brake Pads on the KTM SMT 990
To replace the front brake pads on the KTM SMT 990, you need to unscrew the screws that secure the pads within the corresponding caliper: once these screws are removed, you can slide the pads out of their housing inside the caliper. When the old pads are removed, you can insert the new replacement parts, securing them in their place with the corresponding pin. After the pads are correctly inserted and secured, check that everything functions properly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
