Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Husaberg FE 350?

Model: Husaberg Fe 350
Part: Air filter

Video tutorial

To replace the air filter on the Husaberg FE 350, you need to remove the left side panel of the bike, which is located just below the seat. Under this panel, you will find the air filter, which can then be extracted from its housing by detaching it from its support.

Once the old filter has been removed, you can insert a new one and secure it in its housing using the appropriate support. After that, reinstall the left side panel of the bike to cover the filter housing.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Husaberg FE 350
Fe 350 This guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Husaberg FE 350 enduro bike. First, unscrew the …
How to replace the exhaust on the Husaberg FE 350?
How to replace the exhaust on the Husaberg FE 350?
Fe 350 To replace the exhaust on the Husaberg FE 350, loosen the screws that secure the side protection panel of the rear mudguard on the right side of the …
How to Replace the Countershaft Seal on the Husaberg FE 350?
How to Replace the Countershaft Seal on the Husaberg FE 350?
Fe 350 To replace the countershaft seal on the Husaberg FE 350, you need to loosen the central nut that secures the sprocket, located on the left side of th…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos