Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Fe 350
Part:

In this video tutorial, we will see the instructions for removing the chain and sprocket from a Husaberg FE 350, following these steps. First, remove the link that will allow you to slide off the chain, as illustrated in the video; then remove the rear wheel by unscrewing the central bolt, and unscrew the screws securing the sprocket using a torx key. At this point, replace the sprocket with the new one; all that’s left is to reassemble the rear wheel, adjusting everything, and install the chain by applying the reverse procedure of disassembly!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Countershaft Seal on the Husaberg FE 350?
How to Replace the Countershaft Seal on the Husaberg FE 350?
Fe 350 To replace the countershaft seal on the Husaberg FE 350, you need to loosen the central nut that secures the sprocket, located on the left side of th…
How to replace the exhaust on the Husaberg FE 350?
How to replace the exhaust on the Husaberg FE 350?
Fe 350 To replace the exhaust on the Husaberg FE 350, loosen the screws that secure the side protection panel of the rear mudguard on the right side of the …
How to replace the air filter on the Husaberg FE 350?
How to replace the air filter on the Husaberg FE 350?
Fe 350 To replace the air filter on the Husaberg FE 350, you need to remove the left side panel of the bike, which is located just below the seat. Under thi…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos