Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank on a Suzuki GSR 600?

Model: Suzuki Gsr 600
Part:

Video tutorial

In this tutorial, you will see how to remove the fuel tank on a Suzuki GSR 600, a very simple and quick operation. It is advisable to completely empty the tank before doing this.

Start by unscrewing the indicated screws, two located behind the side lights and the remaining ones at the front. Then, remove the plastic panel of the ignition switch.

Next, disconnect the indicators and unscrew all the nuts and bolts securing the tank. Once done, you can lift the tank, disconnect the two hoses, and drain any remaining fuel inside.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Change the Coolant in the Suzuki GSR 600?
How to Change the Coolant in the Suzuki GSR 600?
Gsr 600 Today, we will guide you on how to bleed and replace the coolant or antifreeze in the Suzuki GSR 600 motorcycle. First, place your motorcycle on a st…
Replacing the Air Filter on the Suzuki GSR 600
Replacing the Air Filter on the Suzuki GSR 600
Gsr 600 In this video, see how to remove and replace the engine air filter on the Suzuki GSR 600 motorcycle by following these simple and quick steps. First,…
Replacing the Air Filter on a Suzuki GSR 600
Replacing the Air Filter on a Suzuki GSR 600
Gsr 600 In today's video, we will go through step-by-step instructions to remove and replace the engine air filter on the Suzuki GSR 600 motorcycle. First, r…

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos