Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Suzuki Burgman 650

Model: Suzuki Burgman 650
Part: Spark plugs

Video tutorial

To replace the spark plugs on a Suzuki Burgman 650, loosen the screws securing the fairing at the front of the bike, just behind the front wheel. Once these screws are loosened, you can remove the fairing and access the components underneath: here you will find the coils, which need to be disconnected from their respective cables and removed from their housings, allowing you to then remove the underlying spark plugs.

After the old spark plugs have been removed, insert the new ones and reassemble all previously removed components.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…
How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
Burgman 650 Before starting, position your Suzuki Burgman 650 on the centre stand. Begin by removing the front inner fairing by unscrewing the screws and unclipp…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos