Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Gn 250
Part: Clutch

To replace the clutch on a Suzuki GN 250, first loosen the screws securing the cover located on the right side of the bike, at the lower centre of the side: once the fixing screws are loosened, you can remove the cover and access the components underneath. The various discs that make up the clutch can be removed from its housing, allowing you to replace them with new spare parts; these will be secured with the corresponding bolts, and then cover everything with the appropriate casing.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a TM Racing 250
How to Replace the Clutch on a TM Racing 250
Tm Racing 250 You can replace the clutch on a TM Racing 250 by loosening the screws that secure the transmission cover, located on the left side in the lower centr…
How do you replace the clutch of the Ossa MAR 250?
How do you replace the clutch of the Ossa MAR 250?
Mar 250 To replace the clutch of the Ossa MAR 250, you will need to loosen the screws that secure the side cover panel of the engine block, under which you w…
How to Replace the Clutch Master Cylinder on a KTM EXC 250
How to Replace the Clutch Master Cylinder on a KTM EXC 250
Exc 250 This guide will show you how to remove and replace the clutch master cylinder on the KTM EXC 250 enduro bike. First, place your bike on a stand and s…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos