Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Sx 250
Part: Clutch

To replace the clutch on a KTM SX 250, you need to unscrew the bolts securing the cover on the right side of the bike, near the kickstarter. Once the cover has been removed, you can unscrew all the bolts holding the clutch in its housing, allowing it to be removed and replaced with a new spare part. After the old clutch has been removed, insert the new one and secure it with the appropriate bolts. After installation, close the side cover with the corresponding screws.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Sx 250 Today's main instructions will show us how to disassemble and replace the oil seal of the crankshaft of the KTM SX 250 enduro motorcycle. First, we p…
Sx 250 In this tutorial, you will learn how to perform routine maintenance by changing the engine oil on the KTM SX 250 enduro bike. First, drain the old en…
Sx 250 This guide will show you how to dismantle and replace the front wheel bearing on the KTM SX 250 enduro bike in simple steps. First, place the bike on…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos