Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Crankshaft Oil Seal on the KTM SX 250

Model: Ktm Sx 250

Video tutorial

Today's main instructions will show you how to remove and replace the crankshaft oil seal on the KTM SX 250 enduro bike. First, place the bike on a stand and begin by removing the clutch cover, then remove the oil seal cover; use a small, thin, pointed lever to remove and replace the oil seal with the new one, inserting it until it is flush, as shown in the video.

At this point, refit the cover and pour in the new suitable oil, adding the correct amount (as indicated in the user and maintenance manual)!


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Sx 250 In this guide, we will see the procedure to remove and replace the crankshaft oil seal and the sprocket on the KTM SX 250 enduro bike. First, remove …
Sx 250 To replace the clutch on a KTM SX 250, you need to unscrew the bolts securing the cover on the right side of the bike, near the kickstarter. Once the…
Sx 250 These brief and simple instructions will guide you on how to disassemble and replace the air filter of the KTM SX 250 engine. First, place the bike o…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos