Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Gs 500
Part: Air filter

Here are the instructions to remove and replace the air filter of the engine on the Suzuki GS 500 motorcycle. First, place the bike on its centre stand and begin by removing the seat; then unscrew the bolts of the fuel tank to remove it as well, as shown in the video. At this point, unscrew the bolts of the air filter, which is secured to the filter box; remove it and replace it with a new one of the correct type, securing it properly. Finally, reattach the fuel tank, connecting the hose to the fuel tap!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Suzuki GS 500?
How to Change the Engine Oil in a Suzuki GS 500?
Gs 500 As shown in this tutorial, changing the engine oil in a Suzuki GS 500 is an extremely simple and quick task. First, wait for the engine to cool down …
How to Replace the Battery of the Suzuki GS 500
How to Replace the Battery of the Suzuki GS 500
Gs 500 In this brief and simple guide, follow the instructions to remove and replace the battery of the Suzuki GS 500 motorcycle. First, place your motorcyc…
How to Replace the Clutch Cable of the Suzuki GS 500
How to Replace the Clutch Cable of the Suzuki GS 500
Gs 500 The instructions in this guide will show you how to remove and replace the clutch cable of the Suzuki GS 500 motorcycle. First, place the motorcycle …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos