Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, see how simple it is to reset the service light on a Suzuki Burgman 250: the warning light remains illuminated on the right side of the scooter's display. You need to turn off this annoying light, especially since you have already completed all the required services. How to do it? Below the speedometer, there are two buttons: press the one on the left and hold it down while turning on the ignition with the other hand. Continue holding the button for a few seconds until the light on the right side goes out. At this point, the reset is complete, and you can turn off the ignition.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 200
How to Reset the Oil Light on the Suzuki Burgman 200
Burgman 200 If you have just changed the oil on your Suzuki Burgman 200 but the warning message continues to appear on the instrument cluster, follow this manual…
Resetting the engine oil change indicator light (service) on the Suzuki Burgman 200.
Resetting the engine oil change indicator light (service) on the Suzuki Burgman 200.
Burgman 200 Today we will discover the instructions that allow us to reset the maintenance light for the oil change on the Suzuki Burgman 200. We perform the res…
Reset the Engine Oil Warning Light on the Suzuki Burgman 200
Reset the Engine Oil Warning Light on the Suzuki Burgman 200
Burgman 200 Briefly follow the steps to reset the service warning light for the engine oil change on the Suzuki Burgman 200 scooter. First, place the scooter on …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos