Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of the Suzuki Burgman 650

Model: Suzuki Burgman 650
Part: Wheel

Video tutorial

Here are the steps to remove and replace the rear wheel or tyre of the Suzuki Burgman 650 scooter. First, place the scooter on the centre stand and start unscrewing the screws of the transmission cover to remove it. Next, unscrew the mounting screws of the rear brake caliper, then use a socket spanner with an extension to unscrew the central nut of the wheel, as shown in the video.

At this point, remove the pin and slide off the rear wheel, replacing the tyre if necessary; then reassemble everything!


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to disassemble and replace the front wheel of the Suzuki Burgman 650
How to disassemble and replace the front wheel of the Suzuki Burgman 650
Burgman 650 Today we will see the steps that will allow us to disassemble and replace the front wheel of the Suzuki Burgman 650 scooter. First of all, we put the…
How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos