Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Suzuki Boulevard C90, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drainage hole bolt and unscrew it using a 14mm socket wrench. Let all the oil contained in the system come out, unscrew the old filter and tighten both the replacement and the bolt. At this point, all that remains is to pour the necessary amount of oil through the appropriate upper hole.

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil of the Suzuki Boulevard?
How do you replace the motor oil of the Suzuki Boulevard?
Boulevard In order to replace the motor oil of the Suzuki Boulevard, you need to loosen the drain plug of the oil pan, located in the central lower part of the…
How to change the engine oil of a Suzuki Boulevard?
How to change the engine oil of a Suzuki Boulevard?
Boulevard To change the engine oil of a Suzuki Boulevard, start by making sure the engine is cold. Lift the motorcycle on a central or side stand to stabilize …
How to Change the Engine Oil of the Suzuki Boulevard?
How to Change the Engine Oil of the Suzuki Boulevard?
Boulevard You can change the engine oil of the Suzuki Boulevard by loosening the drain plug located at the lower centre of the bike. Once the plug is removed, …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos