Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on Suzuki Ignis

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Brake pads

Is it time to replace the brake pads on your car? Good, here you will find practical tips to do it quickly. Park the vehicle. Start loosening the wheel bolts, then lift the car, remove the pins, and take off the wheel. Using a spanner, unscrew the bolt located behind the brake caliper and use a lever to push the pads back to fully retract the pistons. Now lift the caliper and clean the area of dirt and brake dust. Fit the new parts into their positions with the caliper and tighten the bolt behind the brake. Reinsert the wheel and start tightening the nuts. Lower the car and tighten the nuts.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Brake Pads on a Suzuki Ignis 3
How to Change the Front Brake Pads on a Suzuki Ignis 3
Suzuki Ignis (2016-2024 / MK 3) This brief guide outlines the main steps to remove and replace the front brake pads on the third series Suzuki Ignis. First, lift the vehicle and rem…
How to Set the Time on a Suzuki Ignis
How to Set the Time on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Before starting, sit in the driver's seat of your Suzuki Ignis. Begin by activating the instrument panel by turning the ignition key in the lock, wit…
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos