Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Brake Pads on a Suzuki Ignis 3

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Brake pads

This brief guide outlines the main steps to remove and replace the front brake pads on the third series Suzuki Ignis. First, lift the vehicle and remove the front wheel; then unscrew the bolts securing the brake caliper to access the pads. At this point, replace the old brake pads with new ones, using the original ones; clean the caliper of dirt and press the piston to retract it. Finally, reassemble the brake caliper and replace the pads on the other side!

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Pads on Suzuki Ignis
How to Replace Brake Pads on Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) Is it time to replace the brake pads on your car? Good, here you will find practical tips to do it quickly. Park the vehicle. Start loosening the whe…
How to Change the Clock on Suzuki Ignis
How to Change the Clock on Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) This guide provides the necessary instructions to change the time on a Suzuki Ignis. First, get in the vehicle and turn on the ignition. Then, press …
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos