Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Suzuki Ignis?

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Service warning light

From the display of the Suzuki Ignis, you can clear the Service light by turning on the ignition and pressing the INFO button next to the instrument panel. Pressing the button will bring up a menu that you can navigate using the + and - buttons next to the INFO button. Once you select "Oil Change" first, and then "Reset", you can clear the light. To do this, confirm by holding the INFO button until a confirmation message appears. Once the reset is complete, turn off and then on the ignition to ensure the reset.

Posted on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Suzuki Ignis?
How to Reset the Service Light on the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) To reset the Service light on the Suzuki Ignis, turn on the ignition and press the INFO button located next to the instrument cluster. While holding …
How to reset the "Service" light on a Suzuki Ignis?
How to reset the "Service" light on a Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) To reset the "Service" light on a Suzuki Ignis, turn the ignition on without starting the engine. Using the buttons on the steering wheel, navigate t…
How to Reset the Service Light on a Suzuki Ignis?
How to Reset the Service Light on a Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To reset the Service light on a Suzuki Ignis, turn the key to switch on the instrument panel and press the INFO button located to the right of the sp…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos