Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check Tyre Pressure on a Suzuki SX4 S-Cross

Model: Suzuki Sx4 - Years 2013-2021
Part: Checks and maintenance

To check the tyre pressure on a Suzuki SX4 S-Cross, first ensure the tyres are cold and turn the ignition to the ON position. Press and hold the selection knob on the instrument panel for more than three seconds to access the settings menu. Rotate the knob to the "TPMS" option and press to confirm. Then select "Tyre Press" and press the knob again. The display will show the pressure detected for each tyre. Compare the values with those indicated on the vehicle's label and adjust the pressure if necessary. After inflating, drive for a few minutes to allow the system to update the displayed values.

Posted on 25 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset of the tire pressure warning light of the Suzuki SX4.
Reset of the tire pressure warning light of the Suzuki SX4.
Suzuki Sx4 (2013-2021 / JY, MK 2) .. light on the Suzuki SX4, as well as the S-Cross. Before resetting the TPMS sensors, it is necessary for all four tires to be at the correct operating.. …
Resetting the tire pressure warning light of the Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) .. light of the Suzuki SX4, as well as the S-Cross; before recalibrating the TPMS sensors, it is necessary for all four tires to be at the correct.. …
Resetting the Tyre Pressure Warning Light on the Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) Today, we will discover the necessary instructions to reset the tyre pressure warning light on the Suzuki SX4; before resetting the TPMS sensors, ens…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos