Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Brake Pad Replacement

Model: Suzuki Alto - Years 200-2015
Part: Brake pads

Lift the vehicle with a jack and remove the front wheel; unscrew the lower retaining pin of the brake caliper from the bracket and rotate it upwards; then remove the old pads and retract the caliper piston by levering with a screwdriver (using a C-clamp is recommended) to accommodate the new pads; once the new pads are in place, reposition the brake caliper and tighten the retaining pin. Before inserting the new pads, it may be useful to apply copper grease to ensure smooth operation and prevent seizing.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Alto fuse box diagram and positioning
Suzuki Alto fuse box diagram and positioning
Suzuki Alto (2008-2014 / MK 7) Let's discover the information related to the fuse boxes of the Suzuki Alto, identifying their positioning and the fuse diagram. First, we open the f…
Fuse Diagram and Location for the Suzuki Alto
Fuse Diagram and Location for the Suzuki Alto
Suzuki Alto (2014-2024 / Ha36s, Ha36v) Below are the instructions showing the positioning of the internal fuse boxes of the Suzuki Alto, in simple steps. First, open the front door on the …
Position and Diagram of the Fuse Boxes on a Suzuki Alto
Position and Diagram of the Fuse Boxes on a Suzuki Alto
Suzuki Alto (2008-2014 / MK 7) In this video tutorial, you will see the positioning and diagram of the fuse boxes on a Suzuki Alto. First, locate the external fuse box, situated at…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos