Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Time in the Suzuki Ignis?

Model: Suzuki Ignis MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Clock

See other generations:
Video tutorial

In cars where the time setting is not automated, like the Suzuki Ignis, you need to change the time manually. In this video tutorial, you can see how to do it. Turn on the instrument panel and press the large circular button in the centre of the console.

Next, hold down the "MODE Clock" button on the left until you hear a beep. The time will start to flash, and you can proceed to change it. Use the up and down arrows to adjust the numbers, while the left and right arrows allow you to switch between hours and minutes.

Finally, press the "MODE Clock" button to save the setting.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Suzuki Ignis (2016-2024 / MK 3) This guide provides the necessary instructions to change the time on a Suzuki Ignis. First, get in the vehicle and turn on the ignition. Then, press …
Suzuki Ignis (2016-2024 / MK 3) In this tutorial, you will see how to set the time in a Suzuki Ignis, a very simple and quick operation, for example, after a flat battery or when th…
Suzuki Ignis (2016-2024 / MK 3) In this tutorial, see how to set the time in a Suzuki Ignis, a very simple and quick task to perform, for example, after replacing the battery or fol…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos